End cap sleeve with over pressure valve. 

 

The end cap sleeve with over pressure valve is made of Polyolefin with strong glue applied to the interior which

ensures optimal adhesion of parts.


The over pressure valve equalizes the pressure within in a cable or pipe.
This is done automatically at pressures of 3-5 PSI (0.20 -0.34 Bar).

degasing.jpg

Type

ID before shrink

D1

ID after shrink

D2

Length

L

Wall density

shrunk G

30/11 30,0 11,0 75,0 2,5
40/15 40,0 15,0 90,0 3,3
40/15 L 40,0 15,0 120,0 3,3
55/25 5,0 25,0 125,0 3,8
55/25 L 55,0 25,0 170,0 3,8
75/35 75,0 35,0 140,0 4,0
75/35 L 75,0 35,0 180,0 4,0
100/45 100,0 45,0 160,0 4,0
100/45 L 100,0 45,0 200,0 4,0
130/60 130,0 60,0 160,0 4,6
130/65 L 130,0 65,0 300,0 4,6
154/60 154,0 60,0 165,0 4,6
154/65 L 154,0 65,0 300,0 4,6
230/125 230,0 125,0 120,0 4,6
* All dimensions are in millimetres. Other dimensions and colours on request.

Product Information
Material: Polyolefin, cross-linked.
Shrink ratio: See above. 
Shrink temperature: 125°C
Service temperature range: -40°C to 100°C
Standard colour: Black
Dielectric strength: 12 kV
Approval: RoHS